 |
|
|
|
Physical Properties (Typical) |
|
| Type Polyvinyl acetate emulsion |
|
Calculated VOC: 3.2 g/L |
| State Liquid |
|
Weight/gallon 9.7 lbs. |
| Color Off White |
|
Chalk temperature* Approx. 50°F. |
| Dried film Translucent |
|
Flashpoint >200°F. |
| Solids 42.0% |
|
Freeze/thaw stability Stable |
| Viscosity 4,500 cps |
|
pH 4.9 |
| Storage life 6 months in tightly closed containers at 70°F. |
|
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
|
|
|
|
Application Guidelines |
|
Application temperatureAbove 50°F.
Open assembly time15 minutes (70°F./50% RH)
Total assembly time15-20 minutes (70°F./50%RH)
Minimum required spread Approximately 6 mils or 250 square feet per gallon
Required pressure application 30-80 psi for HPL, 100-150 psi for Panel-on-Frame,
100-250 psi for Veneer
Methods of application For most consistent coverage a mechanical spreader is recommended.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.
|
|
|
|
Bond Strength ASTM D-905
(On Hard Maple) |
|
| Temperature |
Strength psi |
% Wood Failure |
|
| Room Temperature |
2,711 |
32 |
| 150°F. Overnight |
1,890 |
1 |
|
|
|
|
Product Features |
|
Moderate speed of set
Economical alternative to contact cement
Suitable for large-scale flat laminating
Dries translucent
Water cleanup & non-toxic
Suitable for panel-on-frame cold press applications
|
|
|
|
Limitations |
|
Titebond Cold Press for HPL is specifically designed for laminating flexible materials and is not suited for other types of assembly applications. Do not use when temperature, glue or materials are below 50°F. Not recommended for exterior use or where moisture is likely. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING. |
|
|
|
Caution Statement |
|
No caution information is needed. Please refer to the Material Safety Data Sheet for further information. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 4617 |
5 Gallon Pail |
1 |
52 |
24 |
| 4618 |
55 Gallon Drum |
1 |
587 |
4 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International