PROvantage Foamboard PROvantage Foamboard

Titebond PROvantage Foamboard Adhesive is the only solvent-based, VOC-compliant formula specifically designed foamboard applications. It is the perfect choice for bonding foamboard insulation and polystyrene to most common building materials including wood, drywall, ceramic and metal.

It offers a fast grab and excellent bond strength, minimizing the need for additional bracing. This solvent-based, low VOC formulation meets all State and Federal VOC regulatory requirements and exceeds the performance requirements of ASTM C557.

LEED/NAHB Specification Sheets
MSDS
3471 - 10 oz. Cartridge
3472 - 28 oz. Cartridge
 
 
 
 
 
 
 
 
MSDS
Product Guide
View PDF
Download Adobe Acrobat

Physical Properties (Typical)
Type:Proprietary Synthetic Polymer Calculated VOC (less water): < 50 g/L
State:Thixotropic Medium Viscosity Mastic Weight/gallon:11.2 lbs.
Color: Brown Flashpoint: 14°F
Solids: 71% Freeze/thaw stability: Will not freeze
Viscosity: 150,000 cps Storage life:12 months in tightly closed containers at 75°F
Application Guidelines Application temperature:40°F to 100°F
Service temperatures:-20°F to 120°F
Method of application:Cartridge/caulking gun
Coverage (maximum): Approximate length of bead according to bead diameter:

Container

1/8" bead                   1/4" bead                   3/8" bead                
10 oz. Cartridge                   123 ft. 30 ft. 13 ft.

Working time:Approximately 20 minutes for a 1/4" bead
Working surfaces:Surfaces to be bonded should be clean, dry and free from excessive oil, grease, water, dirt or any other material that may deter adhesion.
Cleanup:Tools/adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions.
Product Features
  • Waterproof
  • Bridges gaps
  • VOC-compliant
  • Strong, durable bond
  • Safe for foam insulation
  • Minimizes need for bracing

    Exceeds the requirements of ASTM C557.

  • Limitations Not designed for continuous submersion. Do not apply to polystyrene foam if temperature is greater than 90°F. Do not adhere one non porous material to another as this will slow or prevent drying.
    Caution Statement DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains methyl acetate, diethylene oximide and residual vinyl acetate. Keep away from heat, sparks and flame. Use only with positive cross-ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin, liver kidney or respiratory system effects. First Aid: If dizziness or other adverse effects are experienced, move to fresh air; contact physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persist. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
    Ordering Information
    Cat. No. Size Units per
    Package
    Weight Packages
    per Pallet
    3471 10 oz. Cartridge 12 13 108
    3472 28 oz. Cartridge 12 38 33
    Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.


    Franklin International ©1999 Franklin International Legal Disclaimer Privacy Policy