 |
|
|
|
Physical Properties (Typical) |
|
| TypeLatex |
|
Calculated VOC:16.2 g/L |
| ColorBeige |
|
Flashpoint>200 °F.(Pensky-Martin Closed Cup) |
| Solids51% |
|
Freeze/thaw stabilityStable (5 cycles at 20 °F.) |
| ViscosityRoller, trowel or spray grade |
|
Storage life12 months in tightly closed containers |
| Weight/gallon 9.5 lbs. |
|
|
|
|
|
Application Guidelines |
|
Uses Heavy traffic areas for residential, commercial, institutional and industrial installations.
Tiles: Vinyl composition, asphalt, and foam backed hardwood parquet.
Substrates: Plywood, hardboard, association grade particle board underlayments, felt lining, and alkali free concrete, asphalt, terazzo, tile and selected sealed surfaces.
Floor must be clean and dry. Subfloor and materials are to be at least 65 °F., prior to and after installation. Cracks and uneven areas are to be filled and sanded smooth. Rough, dried asphalt cutback areas are to be sanded smooth and cleaned. When applying over old tile, the surface must be smooth and well adhered.
Franklin 920 may be applied by roller, brush, trowel or airless mastic gun. On smooth surfaces, use a 1/32" U-notch trowel at the rate of 250 square feet per gallon. On rougher surfaces, use a 1/16" square-notch trowel at the rate of 150 square feet per gallon. By roller, brush or spray, apply at the rate of 135 square feet per gallon on smooth surfaces and apply heavier on rough surfaces. Minimum open time is 20 minutes, or until adhesive becomes nearly clear and no longer transfers to the finger when lightly touched. Set tiles in place carefully because they will not slide. Roll within 12 hours with a heavy linoleum roller. Restrict heavy traffic for 24 hours.
Cleanup: Allow adhesive to dry well before exposing installation to cleaning. Use water to remove adhesive spots and clean tools.
|
Floor Type |
Trowel Size |
Coverage |
| Vinyl Composition Tile
|
1/32" x 1/32" x 1/32" U-notch |
250 Sq.Ft./gallon |
|
1/16" x 1/16" x 1/16" Square-notch |
150 Sq.Ft./gallon |
|
|
CLEAN TROWEL WITH WATER OFTEN TO PREVENT ADHESIVE BUILD-UP. |
|
|
|
|
Product Features |
|
Fast drying
Nonflammable
Non-toxic
Freeze/thaw stable
Water-resistant
|
|
|
|
Limitations |
|
Use in well ventilated area. Do not use over high alkaline concrete (over 9.0 pH) or over subfloor with excessive moisture (over 6% weight by calcium chloride test). Do not use directly over or under solid vinyl tile or sheet goods. KEEP FROM FREEZING. |
|
|
|
Caution Statement |
|
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting, contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persist, contact physician. For additional information, refer to Material Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 9234 |
4 Gallon |
1 |
40 |
36 |
| 9236 |
Gallon |
4 |
41 |
30 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International