 |
|
|
|
Physical Properties (Typical) |
|
| Type Latex |
|
Calculated VOC :15.6 g/L |
| Color Beige |
|
Flashpoint >200 °F.(Pensky-Martin Closed Cup) |
| Solids 61% |
|
Freeze/thaw stability Stable (5 cycles at 20 °F.) |
| Viscosity Trowel grade |
|
Storage life12 months in tightly closed containers |
| Weight/gallon 10.2 lbs. |
|
|
|
|
|
Application Guidelines |
|
Uses Light to moderate traffic areas for residential,commercial and institutional installations.
Carpets: Woven polypropylene, jute, latex, foam, rubber and soft unitary backings.
Tiles: Vinyl composition, asphalt and cork.
Resilient Sheet Goods: Mineral, felt, paper and rubber backings.
Substrates: Plywood, hardboard, association grade particleboard underlayments, felt lining, moisture and alkali free concrete and asphalt.
Floor must be clean and dry.Subfloor and materials are to be at least 65 °F., prior to and after installation. Cracks and uneven areas are to be filled and sanded smooth.
Carpet:Use a 3/32" V-notch trowel for smooth and 1/8" U-notch trowel for deep textured backings, or very porous substrates. Open time is between 15 and 60 minutes to promote adhesive transfer.
Employ a lightweight roller within one hour of installation.
Tile:Use a 1/16" square notch trowel. Open time is between 30 minutes and two hours. Adhesive must transfer to tile backing to bond. Employ a 100 pound roller within one hour of installation.
Resilient Sheet Goods:Use a 1/16" square notch trowel. Open time is 10-45 minutes. Adhesive must transfer to backing in order to bond. Employ a linoleum roller immediately after installation.
Cleanup:Allow adhesive to dry well before exposing installations to cleaning water. Use water to remove adhesive spots and clean tools.
|
Floor Type |
Trowel Size |
Coverage |
| Carpet
|
3/32" x 3/32" x 3/32" V-notch |
15 Sq.Yds./gallon |
|
|
1/8" x 1/8" x 1/8" U-notch |
11 Sq.Yds./gallon |
| Tile & Sheet Goods
|
1/16" x 1/16" x 1/16" Square-notch |
150 Sq.Ft./gallon |
|
|
CLEAN TROWEL WITH WATER OFTEN TO PREVENT ADHESIVE BUILD-UP. |
|
|
|
|
Product Features |
|
Lower permanent bond strength
Freeze/thaw stable
Water-resistant
Fast tack
Nonflammable
Non-toxic
|
|
|
|
Limitations |
|
Use in well ventilated area. Do not use over high alkaline concrete (over 9.0 pH) or over subfloor with excessive moisture (over 6% weight by calcium chloride test). Do not use directly over or under solid vinyl tile or sheet goods. KEEP FROM FREEZING. |
|
|
|
Caution Statement |
|
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting, contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persist, contact physician. For additional information, refer to Material Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 9204 |
4 Gallon |
1 |
44 |
36 |
| 9206 |
Gallon |
4 |
44 |
30 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International