 |
|
|
|
Physical Properties (Typical) |
|
| Type Cross-linking polyaliphatic emulsion |
|
Calculated VOC (less water) 13.7 g/L |
| State Liquid |
|
Weight/gallon 9.1 lbs. |
| Color White |
|
Chalk temperature* Approx. 55°F. |
| Dried film Translucent |
|
Flashpoint >200°F |
| Solids 48% |
|
Freeze/Thaw stability Stable |
| Viscosity 4,000 cps |
|
pH 3.0 |
| Storage life 2 years in tightly closed container at 75°F. |
|
*Chalk temperature indicates the lowest recommended temperature at which the glue, air or materials can be during application, to assure a good bond.
|
|
|
|
Application Guidelines |
|
Application TemperatureAbove 55°F.
Assembly Time After Glue Application 5 minutes (70°F./50%RH)
Methods of Application Plastic bottles with fine tips.
Installation MethodTitebond Tongue & Groove Flooring Glue can be installed using the continuous bead method. When using this method, a water-resistant joint is created. Follow the flooring manufacturers’ directions for proper positioning of the adhesive bead. Some manufacturers prefer gluing the top of the tongue and others prefer gluing of the groove. Titebond Tongue & Groove Flooring Glue is the professional installer’s choice for either method.
Clean-up Wet adhesive can be cleaned with water and a damp cloth. If adhesive has dried, scrape off excess. For specific cleaning instructions, please call Franklin Technical Service at 1-800-347-4583.
|
|
|
|
Bond Strength ASTM D-905
(On Hard Maple) |
|
| Temperature |
Strength psi |
% Wood Failure |
|
| Room Temperature |
3,750 |
72 |
| 150°F. Overnight |
1,750 |
6 |
|
|
|
|
Product Features |
|
For all types of laminate and floating floors, even over radiant heat systems
Superior bond strength
Passes Type II water-resistance testing
Low chalk temperature
Fast drying
Easy application process
Noticeable white color for easy cleanup
Easy cleanup when glue is wet
Resists solvents & water when dry
Freeze/thaw stable
Environmentally superior and safe to use
Non-toxic
Nonflammable
VOC-compliant
|
|
|
|
Limitations |
|
Titebond Tongue & Groove Flooring Glue passes Type II water-resistance tests. Do not use for joints below the waterline or continuous submersion. Do not use when temperature, glue or materials are below 55°F. KEEP FROM FREEZING. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Remove excess glue from surface while wet. Do not allow glue to dry as it will be difficult to remove. |
|
|
|
Caution Statement |
|
No caution information is needed. Please refer to the Material Safety Data Sheet for further information. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 2104 |
16 oz. Bottle |
12 |
16 |
100 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International