Titebond Extend Wood Glue is a slower setting version of Titebond Original Wood Glue. It offers superior performance in a broad range of applications, including edge and face gluing. It is particularly useful in complex operations such as curved railings and other assemblies that require more time to align. Titebond Extend develops a bond stronger than wood itself, offers excellent sandability and is unaffected by finishes. It is compatible with all common species of wood, as well as particleboard, MDF, plywood and other porous materials.		9104 - 16 oz. Bottle 9106 - Gallon Bottle 9107 - 5 Gallon Pail 9108 - 55 Gallon Drum

	Physical Properties (Typical)		Type Aliphatic resin emulsion Calculated VOC:1.0 g/L State Liquid Weight/gallon 9.7 lbs. Color Yellow Chalk temperature*Approx. 40°F. Dried film Yellow Flashpoint >200°F. Solids 42.3% Viscosity 3,500 cps pH 4.8 Storage life 6 months in tightly closed containers at 70°F. *Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
	Application Guidelines		Application temperatureAbove 40°F. Open assembly time15 minutes (70°F./50%RH) Total assembly time20-25 minutes (70°F./50%RH) Minimum required spreadApproximately 6 mils or 250 square feet per gallon Required clamping pressure Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods) Methods of application Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications. Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.
	Bond Strength ASTM D-905 (On Hard Maple)		Temperature Strength psi % Wood Failure Room Temperature 3,510 81 150°F. Overnight 3,120 61
	Product Features		Slower speed of set - Longer working time Excellent heat-resistance Water cleanup & non-toxic Versatile - Bonds wood, particleboard, MDF, plywood and other porous materials Ideal for complex assemblies and bent laminations
	Limitations		Titebond Extend Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Extend. Not for structural of load bearing applications. Do not use when temperature, glue or materials are below 40°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. It is recommended that Titebond Extend Wood Glue not be stored for extended periods at temperatures lower than 40°F. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.
	Caution Statement		No caution information is needed. Please refer to the Material Safety Data Sheet for further information.
	Ordering Information		Cat. No. Size Units per Package Weight Packages per Pallet 9104 16 oz. Bottle 12 17 100 9106 Gallon Bottle 2 21 63 9107 5 Gallon Pail 1 53 24 9108 55 Gallon Drum 1 585 4
	Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

	©1999 Franklin International	Legal Disclaimer	Privacy Policy