 |
|
|
|
Physical Properties (Typical) |
|
| TypeVinyl acetate ethylene copolymer emulsion |
|
Calculated VOC (less water): 9.47 g/L |
| State Liquid |
|
Weight/gallon 9.15 lbs. |
| Color Light blue |
|
Chalk temperature* Approx. 35°F. |
| Dried film Translucent |
|
Flashpoint >200°F. |
| Solids 62.5% |
|
Freeze/thaw stability Unstable |
| Viscosity 4,350 cps |
|
pH 4.5 |
| Storage life 6 months in tightly closed containers at 70°F. |
|
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
|
|
|
|
Application Guidelines |
|
Application temperature Above 50°F.
Assembly time after glue application15 minutes (70°F./50% RH)
Machinery Designed for use with Black Bros. Panel Express, Evans series 4260 & 4600, Midwest Automation RP3140 & RP3170 continuous panel laminators. For limited lay-up time cold-press operations and pinch roll and dead stacking operations, the machinery options are many. Postforming equipment that spray adhesives and immediately process the panels are ideal.
Substrates High pressure laminate to particleboard or fiberboard
Tolerances Gluing stock should be uniform in thickness. Variation in thickness should not exceed ± .005 inches. Sanding to thickness should be performed using higher than 50 grit abrasives.
Spread Generally, 35-50 pounds per 1,000 square feet of glue line (6-9 wet mils or 180-260 ft2/gal) is adequate. Conveyorized spreaders are commonly used in this application
Cleanup Damp cloth while glue is wet. Scrape off dried excess.
|
|
|
|
Product Features |
|
Fast set - Superior strength
Bonds HPL to wood-based substrates
VOC compliant
Nonflammable - No offensive odor
Post-formable & high heat resistance
|
|
|
|
Limitations |
|
Titebond QuickSet 2000 is specifically designed for use on applications with large surface areas. For this reason it is not suited for other types of assembly applications. Not recommended for continuous submersion or for use below the waterline. KEEP FROM FREEZING. For more information on specific applications, call our Technical Support Team at 1-800-347-4583. |
|
|
|
Caution Statement |
|
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin persists, contact physician. For additional information, refer to Material Safety Data Sheet.
KEEP OUT OF REACH OF CHILDREN. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 61867 |
5 Gallon Pail |
1 |
52 |
24 |
| 61868 |
55 Gallon Drum |
1 |
554 |
4 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International