 |
|
|
|
Physical Properties (Typical) |
|
| Type Synthetic elastomeric polymer |
|
Weight/gallon 10.4 lbs. |
| State Medium-viscosity mastic |
|
Flashpoint Less than 0°F. |
| Color Light tan |
|
Freeze/thaw stability Will not freeze |
| Solids 78% |
|
Viscosity 130,000 cps |
| Storage life 12 months in tightly closed containers at 75°F. |
|
Calculated VOC (less exempt solvent): 47 g/L |
|
|
|
|
Application Guidelines |
|
Application temperature 0°F. to 100°F.
Service temperatures -20°F. to 120°F.
Method of application Cartridge/caulking gun
Coverage (maximum) Approximate length of bead according to bead diameter:
Container |
1/8" bead |
1/4" bead |
3/8" bead |
|
| 10.5 oz. Cartridge |
129 ft. |
32 ft. |
14 ft. |
| 29 oz. Cartridge |
355 ft. |
89 ft. |
39 ft. |
Working timeApprox. 20-30 minutes for a 1/4" bead
Working surfaces Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply Titebond Heavy Duty Construction Adhesive to only one of the surfaces to be bonded. NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw as recommended by the American Plywood Association.
Cleanup Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor ’s precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
|
|
|
|
Product Features |
|
Extremely versatile - bonds most common building materials
Exceeds the performance requirements of the APA's AFG-01 specification
Exceeds the performance requirements ASTM D3498 and ASTM C557 specifications
|
|
|
|
Limitations |
|
Titebond VOC-Compliant Heavy Duty Construction Adhesive is not designed for continuous submersion or for use on polystyrene or polystyrene foams. For polystyrene foam, tub surrounds and most other plastics, we recommend Titebond Interior/Exterior Construction Adhesive. |
|
|
|
Caution Statement |
|
DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains methyl acetate, hexane and acetone. Keep away from heat, sparks and flame. Use only with positive cross ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin, liver, kidney or respiratory system effects. First Aid: If dizziness or other adverse effects are experienced, move to fresh air; call physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN. |
|
|
|
Ordering Information |
|
| Cat. No. |
Size |
Units per
Package |
Weight |
Packages
per Pallet |
|
| 5271 |
10.5 oz. Cartridge |
12 |
12 |
108 |
| 5272 |
29 oz. Cartridge |
12 |
32 |
38 |
|
|
|
|
Important Notice: Our recommendations, if any, for
the use of this product are based on tests believed to be reliable. Since the use of this product is beyond
the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or
effects incidental to such use, handling or possession or the results to be obtained, whether in accordance
with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.
Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict
with existing laws and/or patents covering any material or use. |
©1999 Franklin International