www.Titebond.com

Franklin International MATERIAL SAFETY DATA SHEET
MSDS Name: Titebond Post-forming Neoprene Plus Contact Cement
MSDS Number: 4635
Revision Date: 5/7/07

SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name:                Titebond Post-forming Neoprene Plus
                             Contact Cement
CAS Number:                  none
HMIS Hazard Rating:          Health: 1  Fire: 1  Reactivity: 0

Company Identification:      Franklin International
                             2020 Bruck Street
                             Columbus OH 43207

Contact:                     Franklin Technical Services
Telephone/Fax:               (800) 877-4583 (614) 445-1493
Emergency Phone (24 Hour):   Franklin Security
                             (614) 445-1300
Chemtrec (24 Hour):          (800) 424-9300
Chemtrec International:      (703) 527-3887

Product Class                water/solvent/neoprene based
Product Use:                 contact cement
Product Code:                51420

Division:                    Construction Adhesives & Sealants

SECTION 2 - COMPOSITION AND INFORMATION ON INGREDIENTS
Hazardous Ingredients                     CAS Number       Percent

toluene                                   108-88-3           2.98

OSHA PELs & ACGIH TLVs are listed in Section 8 where applicable.

SECTION 3 - HAZARD IDENTIFICATION

EMERGENCY OVERVIEW:
CAUTION: VAPOR HARMFUL. Contains emulsified TOLUENE. Use only with
positive cross-ventilation. Do not allow contact with eyes or
prolonged contact with skin. Do not ingest.KEEP OUT OF THE REACH OF
CHILDREN. Material is milky blue thin liquid that is slippery when wet
and alkaline in nature.
ROUTES OF ENTRY:
Ingestion:     Yes
Inhalation:    Yes
Skin:          Yes
Eye:           Yes
INHALATION:
Avoid breathing vapor or mists.
May cause headaches and dizziness.
INGESTION:
Ingestion is not a probable route of exposure. Product is highly
alkaline. Caustic will affect the central nervous system and cause
severe stomach distress.
SKIN:
Prolonged or repeated skin contact can cause irritation.
May be harmful if absorbed through skin, may produce kidney, liver and
central nervous system damage.
A single exposure is not likely to result in the material
being absorbed through the skin in harmful amounts.
EYE:
Eye contact with highly alkaline substance may cause irreversible eye
damage. Eye protection must be worn.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE:
Preexisting neurological conditions, skin disorders, and respiratory
diease.
CARCINOGENICITY:
IARC: No

NTP:  No
OSHA: No
REPRODUCTIVE TOXICITY:
Toluene may be harmful to the human fetus based on positive test
results with laboratory animals. Case studies show that prolonged
intentional abuse of toluene during pregnancy can cause birth defects
in humans.
TARGET ORGANS:
Prolonged or repeated overexposure may cause eye, skin, respiratory
system, central nervous system, liver, and kidney damage.

SECTION 4 - FIRST AID MEASURES

INHALATION:
Remove to fresh air. If difficulty persists, seek medical attention.
INGESTION:
Call poison control center immediately.  Follow their specific
instructions. Do not induce vomiting.
SKIN:
Wash with soap and water.  Contact a physician if irritation develops
or persists.
EYE:
Hold eyelids apart and flush with plenty of water for at least 15
minutes. Seek medical attention.

SECTION 5 - FIRE-FIGHTING MEASURES
Flammability Class (OSHA)    IIIB
Flash Point:                 > 200 F
                             Setaflash
Explosive Range:             Not applicable

EXTINGUISHING MEDIA:
Use alcohol foam, carbon dioxide, water spray, or ABC dry chemical
when fighting fires involving this product.
HAZARDOUS COMBUSTION PRODUCTS:
Fumes, smoke, CO and CO2 in the case of incomplete combustion in air.
Hydrogen chloride at temperatures above 392 F (200 C).
FIRE FIGHTING PROCEDURES:
Wear a NIOSH approved self contained breathing apparatus. Wear
appropriate personal protective equipment.

SECTION 6 - ACCIDENTAL RELEASE MEASURES

CONTAINMENT TECHNIQUES:
Use inert absorbent to dike the spill. Keep away from drains.
CLEAN-UP:
Spread absorbent over material and scrape up material/absorbent and
place in an approved container. If product has dried scrape up and
place in an approved container.
EMERGENCY MEASURES:
Isolate hazard area.  Keep unnecessary and unprotected personnel from
entering area.  Wear all appropriate personal protection equipment
(PPE) (see Section 8).

SECTION 7 - HANDLING AND STORAGE

HANDLING:
Wash thoroughly after handling.
Use only in well ventilated area.
Follow all MSDS/label precautions even after container is emptied.
Containers may retain product residues and vapors.
Avoid prolonged or repeated contact with the skin.
STORAGE:
Store at temperatures at or below 125F
Keep from freezing.

SECTION 8 - EXPOSURE CONTROLS AND PERSONAL PROTECTION
Occupational Exposure Limits
           ACGIH TLV     ACGIH TLV-C   ACGIH STEL    OSHA STEL     OSHA PEL

toluene
            20.00 PPM     N/est         N/est         N/est        200.00 PPM

The OSHA Ceiling for toluene is 300 ppm.
ENGINEERING CONTROLS:
Provide general and/or local exhaust ventilation to control airborne
levels below the exposure guidelines.
OTHER:
Facilities storing or utilizing any chemical should be equipped with
an eyewash facility and a safety shower.
RESPIRATORY PROTECTION:
Where exposure limits may be exceeded select a NIOSH approved
respirator with appropriate Protection Factor and cartridge for the
specific contaminents. Follow requirements for respiratory protection
in OSHA 1910.134.
EYE PROTECTION:
Chemical splash goggles (ANSI Z87.1 or approved equivalent).
SKIN PROTECTION:
Where repeated or prolonged contact can occur, wear chemical resistant
gloves.

SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Form:                        Liquid
Appearance/Color:            Blue
Odor:                        Mild latex
Solubility (in water):       Dispersible
pH Value:                    10.5
Boiling Range/Point:         c 212 F
Evaporation Rate:            Slower than n-Butyl Acetate

% Volatile:                  49.8%
Specific Gravity:            1.09
VOC:                         79.6 g/l

SECTION 10 - STABILITY AND REACTIVITY
Stability:                   This product is stable
Hazardous Polymerization:    Hazardous polymerization will not occur

CONDITIONS TO AVOID:
Temperatures below 32 degrees F.
INCOMPATIBLITY:
Strong acids and strong bases
HAZARDOUS DECOMPOSITION PRODUCTS:
Will not occur.

SECTION 11 - TOXICOLOGICAL INFORMATION

Adverse health effects are not expected from normal use of this
product. The following is toxological information for individual
components.
Toluene - Acute:
Toluene is a central nervous system depressant and skin and mucous
membrane irritant. Severe dermatitis may result from its drying and
defatting action. Toluene is an aspiration hazard causing chemical
pneumonitis.
Toluene - Chronic:
Toluene can cause cardiac sensitization. It is toxic to the kidney,
liver can cause effects on the blood system such as increased clotting
time.
Toluene may be harmful to the human fetus based on positive test
results with laboratory animals. Case studies show that prolonged
intentional abuse of toluene during pregnancy can cause birth defects
in humans.

SECTION 12 - ECOLOGICAL INFORMATION

This formulation has not been tested for environmental effects.

SECTION 13 - DISPOSAL CONSIDERATIONS

WASTE DISPOSAL:
Disposal of this product must comply with all applicable federal,
state and local regulations.
CONTAINER DISPOSAL:
Disposal of this container should comply with all applicable federal,
state and local regulations.

SECTION 14 - TRANSPORT INFORMATION
UN Number                    None
UN Pack Group                N/A
UN Class                     Nonhaz
ICAO/IATA Class              Nonhazardous
IMDG Class                   Nonhazardous
Shipping Name                Nonhazardous

Packaging may not be approved for shipping by air. Please contact
Franklin International for further information.

SECTION 15 - REGULATORY INFORMATION
SARA TITLE III SECTION 313:
This product contains the following toxic chemicals subject to the
reporting requirements of Section 313 of the Emergency Planning and
Community Right to Know Act of 1986 and of 40 CFR 372:
Chemical Name                             CAS Number       Percent

toluene                                   108-88-3           2.98

- PROP 65 (TERATOGEN)
      WARNING: This product contains a chemical known to the state of
Caifornia to cause birth defects or other reproductive harm.
Chemical Name                             CAS Number       Percent

toluene                                   108-88-3           2.98

TSCA (Toxic Substances Control Act Inventory):
All components of this product are listed on the TSCA inventory except
as exempted.
PENNSYLVANIA:
Hazardous components required to be listed at .01% or more:
zinc oxide 1314-13-2
Hazardous components required to be listed at 1% or more:
toluene 108-88-3
Nonhazardous components required to be listed at 3% or more:
water 7732-18-5, polychloroprene rubber 9010-98-4, rosin ester
8050-26-8

NEW JERSEY:
water 7732-18-5, polychloroprene rubber 9010-98-4, rosin ester
8050-26-8, toluene 108-88-3, zinc oxide 1314-13-2

SECTION 16 - OTHER INFORMATION

DISCLAIMER:
While the information and recommendations set forth herein are
believed to be accurate as of the data hereof, Franklin International
makes no warranty, express or implied, with respect thereto and
disclaims all liability from reliance thereon.